Support Page For Product Number:
100Base-T Ethernet Workstation Adapters
To insert the network adapter into your PC, please follow the steps below:
- Turn off the computer and remove the computer cover.
- Insert the adapter into a PCI slot.
- Secure this adapter to the rear of the computer chassis and put the computer cover back on.
- Connect the adapter to the network using a straight-through or twisted-pair cable.
Once the hardware has been installed as described above, please download and install the appropriate driver for your operating system.
This adapter uses the National Semiconductor DP83815 Controller. Other compatible drivers for this controller may be available from other sources.